Products

TA-80 Digital Plug-On Transmitter

TA-80 Digital Plug-On Transmitter The TA-80 is a true digital miniature wideband wireless plug-on transmitter with balanced XLR mic input jack, designed for measurement microphones, condenser / dynamic wired microphones, recording microphones and musical instrument microphones. It is compatible with all ACT-8 Series receivers.

The TA-80 has a flat and wide frequency response, ultra-low THD and noise floor, fast transient response, strong anti-interference, and high S/N ratio. The TA-80 has 8 gain levels and is switchable between 12 and 48 V, up to 10 mA current load, to provide phantom power for condenser microphones. The phantom power can be switched off for dynamic microphones.

A built-in high-capacity lithium battery enables continuous 5 to 8 hours of use per charge. TA-80 can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. MIPRO’s TA-80 has reverse polarity protection and battery replacement is fast and easy.

The TA-80 is compact, lightweight and ruggedly built. The aluminum housing is splash-proof and encloses a high efficiency transmitting antenna. The TA-80 has excellent isolation of spurious and external noise interference. The green backlit LCD clearly displays all operation parameters.

The TA-80 turns any microphone into a true digital wireless system producing the full frequency response and natural sound of any premium wired microphone surpassing the traditional characteristics of analogue systems.

  • The TA-80 has a flat and wide frequency response, ultra-low THD and noise floor, fast transient response, strong anti-interference, and high S/N ratio characteristics. These superior characteristics are sufficed to resolve the trouble of tangling microphone cables and the deterioration of analog transmission characteristics. It is the best system to reproduce natural sound of any premium wired microphone.
  • With the balanced XLR mic input jack for installing with any condenser microphone, the TA-80 has 8 gain levels and built-in switchable 12 / 48 V, up to 10 mA current load phantom power for condenser microphones, and the phantom power can be switched off for dynamic microphones.
  • A built-in high-capacity lithium battery enables continuous 5 to 8 hours of use per charge. TA-80 can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. TA-80 has reverse polarity protection and battery replacement is fast and easy.
  • TA-80 is compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference. Built-in high efficiency transmitting antenna, green backlit LCD clearly displays operation parameters. 

  • Frequency Range:  470 ~ 934 MHz (country dependent) 
  • Switching Bandwidth:  64 MHz 
  • RF Output Power:  10 mW / 50 mW switchable (country dependent) 
  • Spurious Emission:  ≦ -60 dBc 
  • Modulation Mode:  New digital modulation 
  • Modulation Type:  Digital modulation fixed envelope 
  • AF Input Level:  2 V max. at AF gain = 0 dB // 7 V max. at AF gain = -12 dB // 20 V P-P by protective circuit 
  • Phantom Power:  Selectable 12 V and 48 V at 10 mA max., off for dynamic microphones 
  • AF Frequency Response:  20 Hz ~ 20 kHz, selectable 100 Hz low cut filter 
  • Battery Type:  1 × ICR18500 Li-ION rechargeable battery 
  • Battery Life:  > 8-hour for RF power at 10 mW and phantom power off. // > 4.5-hour for RF power at 50 mW and 48 V at 2 mA phantom power on. 
  • Charger:  MP-80 with an adaptor plug MPA-80 
  • Dimensions (W × H × D):  44 × 114 × 37 mm / 1.7 × 4.5 × 1.5 " 

Net Weight Approx. 165 g / 5.8 oz., excluding battery