The ACT-80HC rechargeable transmitter is for use with the ACT-818 and ACT-828 receivers. It features a durable magnesium alloy housing, a capsule shockmount design which minimizes handling noise, has a back-lit LCD display and is powered by one 18500 lithium rechargeable battery.
- Innovatively designed metal housing in MIPRO’s distinctive aesthetic and ergonomic style
- Powered by a plug-n-play rechargeable lithium battery. Store the microphone in charger for charging when not in use
- Simply unscrew the grille to open the battery compartment to replace the lithium battery or charge it in the charger
- Transmitter has high-efficiency circuitry design. The included single rechargeable lithium battery can be easily removed or interchanged for charging. The ICR-18500 battery maintains a high charge capacity for up to 600 full charge cycles for cost saving and is environmentally friendly
- Patented capsule suspension design virtually eliminates vibration and handling noises
- Interchangeable capsule module with premium condenser or dynamic options for easy and fast changeovers
- Premium condenser capsules exhibit high fidelity, wide dynamic range, fast transient responses, good feedback rejection, accurate sound image characteristics, transparent sound quality and withstand maximum SPL
- Back-lit LCD displays all operational parameter information
- The bottom housing with built-in high-efficiency antenna features power switch, mute and setup buttons for programmable gain, limiter, low-cut and RF output power
- Patented end-cap cover with color-coded channel identification clips. Detach the end-cap cover for parameters set-up. Reversible end-cap allows shielding of power on/off or mute switches during performance
- Three selectable mute settings: Auto, Manual & Disabled. “Auto” mute activates automatically when handheld transmitter points down towards the ground
- Three selectable gain settings: 0 dB (same as microphone sensitivity), +3 dB, +6 dB
- Two selectable transmitter output power settings: HI (high-power) & LOW (low-power)
- Stable PLL circuits. Automatically synchronized with the receiver’s frequency by MIPRO’s patented ACT™ function.
- Frequency Range: Band 5E, UHF 480 – 544 MHz
- Bandwidth: 64 MHz
- Channel Set-Up: ACT Sync
- RF Output Power: 10 mW / 50 mW (switchable)
- Spurious Emission: ≦ -60 dBc
- Oscillation Mode: PLL Synthesized
- Frequency Stability: ≦ ±0.005% (-10 – +60℃)
- Modulation Type: New digital modulation
- Audio Compression: 2nd generation DSP Inertial coding
- LCD Display: Group, Channel, Frequency, AF gain, Low-cut, Limiter, Encryption status, RF power, Mute mode, Battery status & Error codes
- Gain Setting: +6dB, +3dB, 0dB (3 settings). 0dB=microphone sensitivity
- Battery Type: 1 ICR-18500 1400mAh 3.7V rechargeable lithium battery
- Operating Time: Min. 13 hours
- Current Consumption High Power: Approx. 125 mA; Low Power: approx. 100 mA
- Dimensions (Ø × L): 51 × 250 mm / 2 × 9.8 "
- Net Weight: Approx. 282 g / 9.9 oz
