ACT-2402/ACT-24HC2 Dual-Channel 2.4GHz Handheld System

MIPRO’s Digital Diversity ACT-2400 Series wireless system addresses the industry’s 2.4GHz issues of range, signal stability and channel density. The 1/2U, single- and dual-channel digital receivers operate in the 2.4GHz-ISM band using stable 4-frequency FSK modulation circuitry to provide strong RF signal stability and extended range, utilize dual-tuner true digital diversity reception, and deliver 12 compatible channel operations without signal dropout.

The ACT-24HC handheld boasts a condenser capsule with off-axis rejection and low handling noise. These rechargeable transmitters deliver 10 hours of use on a 4-hour charge.

The ACT-2402/ACT-24HC2 system includes one ACT-2402 dual-channel receiver, two ACT-24HC handheld transmitters and an MP-80 charging station.

Receiver

MIPRO’s Digital Diversity ACT-2400 Series wireless system addresses the industry’s 2.4GHz issues of range, signal stability and channel density
By using an adaptive tracking algorithm, the 2400-Series skips the common Wi-Fi frequencies effectively avoiding interference from most 2.4GHz communication products
Utilizes a 4 frequency hopping spread spectrum technique that avoids any remaining interference
With dual tuner true digital diversity receiving, receiving distance is up to 100 meters (330 ft.) with no signal drop-out
12 compatible simultaneous channel operation
24-bit / 44.1 kHz digital audio sampling
Lo-Cut and Flat EQ settings
Adjustable AF gain & RF power output
Half rack single and dual channel systems
Receiver is enclosed in a sturdy metal case
Front mounted antennas
Optional rack mount hardware

ACT-24HC Transmitter

3 LEDs indicate battery status and turn red to indicate low battery
The multi-layered metal grille protects the capsule against impact, rolling and pop noise
Condenser cardioid capsule delivers better reliability, sensitivity and sound quality
Proprietary capsule suspension design virtually eliminates handling noises for true natural sound reproduction
Outstanding off axis rejection reduces feedback
Locking on/off switch
One-touch ACT syncs the transmitter and receiver frequency automatically
These rechargeable transmitters deliver over 10 hours of use on a 4-hour charge. A 25-minute fast charge provides up to 1-hour operation. The included single rechargeable lithium battery can be easily removed or interchanged for charging. The included intelligent battery charger maintains a high charge capacity for up to 600 charge cycles

Receiver

Chassis: EIA Standard 19″ 1/2U
Display Graphic: OLED
Frequency Range: 2.4GHz ISM band (2.4 – 2.4835GHz)
Preset Frequency: 12
Frequency-hopping: Each channel has 4 preset hopping frequencies
Receiving Mode: Dual-tuner Digital Diversity
Audio Sampling: 24-bit / 44.1 kHz
Sensitivity: -95 dBm
S/N Ratio: > 115 dB(A)
T.H.D.: 0.1 % @ 1 kHz
Audio Frequency Response: 20 Hz – 20 kHz (-2 dB)
Output Connectors: Balanced XLR & Unbalanced 6.3 mm (1/4 “)
Audio Output Adjustment: 0 dB (standard), -10 – +20 dB adjustable range
Latency: < 4.0 ms
Antenna: 2 × 50 Ω fixed antenna
Power Supply: External AC Power Supply
Power Consumption: 2.4 W
Dimensions: 210 × 44 × 180 mm / 8.3 × 1.7 × 7.1 “
Weight: Approx. 0.8 kg / 1.8 lbs
Operating Temperature: -10 – +60℃

Transmitter

Frequency Range: 2.4GHz ISM band (2.4 – 2.4835GHz)
Channel Set-Up: ACT Sync
RF Output Power: 2 mW / 10 mW switchable (country dependent)
Transmitting Mode: Frequency hopping
Max. Audio Input: 6.5 dBV
Battery Meter: 4-level green / red LED display
Battery Type: ICR 18500 rechargeable lithium battery × 1
Current Consumption: Approx. 138 mA
Operating Time: A 25-minute fast charge provides up to 1 hour operation. Minimum 10 hours of operation per 4-hour full charge (depending on the battery quality)
Dimensions: (Ø × L) 51× 248 mm / 2.0 × 9.8 ”
Net Weight: Approx. 255 g / 9 oz